(Army Civilian Acquired Skills Program (ACASP) designated MOS (USAR & ARNG ONLY) (Rescind 201910)
a. Major duties.
The concrete and asphalt equipment operator supervises or operates all equipment used in concrete and asphalt production and paving.
Duties for MOS 12V at each level of skill are:
(1) MOSC 12V1O.
Performs Preventive Maintenance Checks and Services (PMCS) on the Palletized Load System (PLS), concrete mobile mixer, bituminous distributor, asphalt mixing plant, asphalt paver, and other asphalt related equipment.
Produces concrete with concrete mobile mixer.
Fills and heats bituminous material and uses product to perform hand spray and bar spray operations.
Assembles asphalt mixing plant and uses product to lay hot-mixed asphalt with an asphalt paver.
(2) MOSC 12V2O.
Supervises PMCS of the PLS, concrete mobile mixer, bituminous distributor, asphalt mixing plant, asphalt paver, and other asphalt related equipment.
Supervises assembly of the asphalt mixing plant and paving operations.
(3) MOSC 12V3O.
Operates and produces asphalt with the asphalt mixing plant.
Plans and directs the employment of the PLS, concrete mobile mixer, bituminous distributor, asphalt mixing plant setup and operations, asphalt paver, and other asphalt related equipment.
b. Physical demands rating and qualifications for initial award of MOS.
Concrete and asphalt equipment operator must possess the following qualifications:
(1) A physical demands rating of significant (Gray).
(2) A physical profile of 222221.
(3) Red/green color discrimination.
(4) Qualifying scores.
(a)
A minimum score of 90 in aptitude area GM in Armed Services Vocational aptitude Battery (ASVAB) tests administered prior to 2 January 2002.
(b)
A minimum score of 88 in aptitude area GM on ASVAB tests administered on and after 2 January 2002.
(c)
A minimum OPAT score of Standing Long Jump (LJ) – 0140 cm, seated Power Throw (PT) – 0400 cm, Strength Deadlift (SD) – 0140 lbs. and Interval Aerobic Run (IR) – 0040 shuttles in Physical Demand Category “Significant” (Gray).
(5) Must possess a valid state motor vehicle operator license.
(6) Mandatory formal training (completion of MOS 12V10 course conducted under auspices of U.S. Army Engineer School) or meet the civilian acquired skills criteria per Chapter 9-5 (5) (b) of this pamphlet and paragraph (7) below.
(7) ACASP qualification criteria.
Must have 2 years of experience or combination of formal training and experience totaling 2 years in concrete and asphalt paving operations.
(a)
IAW table 9-1 of this pamphlet, Initial Entry Trainee (IET) who qualifies under the ACASP will not be required to attend Advanced Individual Training (AIT) for any additional training.
Upon completion of Basic Combat Training (BCT) Soldier Member will be processed IAW initial assignment instruction.
(b)
Approval and validation to qualify IET for ACASP is through the USAES, Engineer Personnel Development Office (EPDO).
c. Additional skill identifiers.
Note: Refer to table 12-8 (Listing of universal ASIs associated with all enlisted MOS)).
(1) B9– Bradley M2A3/M3A3 Operator/System Maintainer (personnel only). Effective 201903
(2) R7–Army Reconnaissance (Skill level 3 and above personnel only)
d. Physical requirements and SG relating to each skill level are listed in the following tables:
(1) Table 10-12V-1. Physical requirements.
(2) Table 10-12V-2. Standards of grade TOE/MTOE.
(3) Table 10-12V-3. Standards of grade TDA.
Related Pages
- Army Military Occupational Specialties
- 12V MOS – Concrete and Asphalt Equipment Operator
- 12N MOS – Horizontal Construction Engineer
- 12T MOS – Technical Engineer
- 12B MOS – Combat Engineer
- 12 Series MOS
- Army Additional Skill Identifiers
- Army Special Qualification Identifiers
- ASI R7 – Army Reconnaissance
- 68W MOS – Combat Medic Specialist